Harbor 30

Specifications:

LOA: 30 ft 9in
LWL: 26ft 1.5in
Beam: 9ft 11in 
Draft: 6ft 3in
Displacement: 7,500 lbs
Ballast: 3,300lbs
Sail Area: 523.3 sq. ft. 

Hull

  • 100% hand laid-up fiberglass
  • High gloss gel coat

Keel

  • 3,300 pounds of lead ballast encased in a fiberglass shell.
  • Stainless steel keel bolts and nuts.
  • Large sump in the keel for collection and easy removal of bilge water.

Rudder

  • Spade design.
  • Laminated fiberglass.
  • Rudder stock is a tubular stainless shaft.
  • Wheel steering.
  • Tiller is laminated and varnished wood.

Deck & Cockpit

  • 100% hand laid up fiberglass.
  • Core is end grain balsa.
  • G10, which is a glass cloth laminate with an epoxy resin binder, is installed in place of the balsa core wherever hardware is mounted over the interior living space. This eliminates the holes that might allow water to leak into the cabin.
  • Cockpit is 8' long and is self-bailing.
  • A large lazarette hatch in the aft deck offers additional storage.
  • All the sail controls are lead aft to the cockpit where the tails can be tucked into special storage slots.
  • Two self-tailing cabintop winches are provided.
  • Two self-tailing winches are provided in the cockpit (one to port, one to starboard) for jib sheet control.
  • An adjustable backstay is lead under deck to the cockpit.
  • The stainless steel stem fitting is equipped with a roller for a bow anchor.

Interior

  • Sleeping accommodations for four — a forward v-berth and one long quarter berth wide enough for two adults.
  • The main cabin features comfortable seating with padded backrests.
  • Storage is provided under the forward berth and behind the main cabin seating.
  • A galley cabinet with a sink is located on the starboard side aft.
  • A large insulated ice box is built into the galley.
  • An enclosed head is located on the port side aft. A manual head with a holding tank is standard.
  • The cabin sole is teak and holly.

Spars & Rigging

  • Mast, boom, and jib boom are aluminum.
  • Standing rigging is stainless steel Rigger's Choice.
  • Running rigging is colored for easy identification.
  • Lazy jacks are provided for the main.
  • The jib has a roller furler and a Hoyt self-tacking jib boom.
  • The main, jib halyard, jib sock, and lazy jacks are internal.
  • The main outhaul is also internal.
  • A 12: 1 vang is provided for the boom.
  • Windex and masthead light.

Electrical & Mechanical

  • 2 - 12 volt batteries.
  • 12 volt distribution panel.
  • 110 distribution panel, 110 outlet, 12 volt outlet.
  • Running lights.
  • Cabin lights.
  • Manual bilge pump.

Propulsion

  • Yanmar 20 hp., 3 cylinder, 4 stroke diesel.
  • 60 amp alternator.
  • Two-blade folding propeller.
  • Fresh water cooling.
  • Instruments and controls located in the cockpit.

Standard Colors:

Hull: White
Waterline Stripe: Dark Blue or Red
Cove Stripe: Dark Blue or Red
Deck: Light Gray

Options

  • Custom hull color.
  • Custom two-toned deck (white with Antique White non-skid).
  • Custom cove stripe.
  • Custom waterline stripe.
  • Custom waterline highlight stripe.
  • Bottom paint - Pettit Trinidad.
  • Lifting eye.
  • C-Foam cockpit cushions.
  • Cockpit table.
  • Asymmetric spinnaker equipment and bow pole.
  • Ensign & staff.
  • Safety package including:
    4 adult life jackets, 2 child life jackets, fire extinguisher, flares, flashlight, horn, bucket & boat bailer sponge, 10 lb. traditional anchor, 150' nylon anchor line, 10' of 3/16" chain, anchor shackles, 4 dock lines, 2 fenders, Sailkote lubricant, first aid kit.
?

 

There are no videos at this time...Stay Tuned!


Sailing Magazine

Boats.com